Seca 284 User Manual

Describes the primary applications of the seca 284 measuring station in healthcare settings.

Lists essential safety measures for operating the device, including manual consultation and secure placement.

Explains the meaning of DANGER, WARNING, CAUTION, and ATTENTION symbols used in the manual.

Provides safety guidelines for handling and using batteries, including warnings against recharging or disposal in fire.

Provides step-by-step instructions for assembling the column elements of the measuring station.

Details the process of mounting and connecting the multifunctional display to the column element.

Guides the user through connecting the third column element, ensuring proper assembly.

Explains how to correctly install the push-in scale component, highlighting potential measurement errors.

Instructs on how to properly position and level the device using foot screws for accurate measurements.

Describes the process of leveling the device using the spirit level and foot screws for precise alignment.

Explains the necessity of calibration before first use and introduces automated calibration.

Provides step-by-step instructions for performing automated calibration using the calibration rod.

Details the procedure for manual calibration using an object of known height if the calibration rod is unavailable.

Explains the basic procedure for weighing a patient, including turning on the device and stepping onto the scales.

Guides on how to calculate and display the Body Mass Index (BMI) using height and weight measurements.

Explains the process for determining the Body Fat Rate (BFR) using height, weight, and gender inputs.

Explains the basic steps for measuring a patient's height using the head slide.

Provides step-by-step instructions for setting up a new wireless group.

Lists common malfunctions and their corresponding causes and remedies for troubleshooting.