Seca 284 - Restore Factory Settings (rESEt)

Operate scales • 99
English
•With the setting "2", the greatest difference
exists between the displayed and actual
weight value.
4. Confirm the selection.
You will leave the menu automatically.
Switch weight unit
(Unit)
With uncalibrated scales you can select the unit you
wish to use for displaying weight.
NOTE
Note and follow the national regulations
regarding units of measurement.
1. Select the item "Unit" from the menu.
2. Confirm the selection.
The current setting is displayed.
3. Select the unit you wish to use for displaying
weight:
–Kilos (kg)
–Pounds (lbs)
4. Confirm the selection.
You will leave the menu automatically.
Restore factory settings
(rESEt)
You can restore factory settings for the functions
below.
Function Factory setting
Autohold (AHold) on
Acoustic signal (Press) on
Acoustic signal (Hold) on
Attenuation (Fil) 0
Autoclear (Aclr) on
Pre-Tare (Pt) 0 kg
Length/height for
Body Mass Index (BMI)/Body
Fat Rate (BFR)
170 cm
Weight unit kg
50% 50%
Display backlighting duration Permanent
BMI/BFR BMI
Physical Activity Level (PAL) 1,0
Age in years 18
Age in months 0
Unit for height cm