Seca 284 - Operate Scales; Weigh

Operate scales • 85
English
7. Confirm your selection with the Enter key (send/
print).
8. Use the arrow key (hold/zero) to select the “Yes"
setting.
9. Confirm your selection with the Enter key (send/
print).
The display “Auto” appears.
10. Use the arrow key (hold/zero) to enter the length of
the object.
11. Confirm the set value with the Enter key (send/
print).
The device is calibrated. You can perform height
measurements with the device.
5. OPERATE SCALES
5.1 Weigh
Start weighing 1. Ensure that there is no load on the scales.
2. Press the Start key of the multifunctional
display.
se[A appears on the display, and then all the
display's elements appear briefly.
The scales are operational when the display reads
0.00.
3. Ask the patient to step onto the scales.
The patient's weight is displayed.
4. Read off the measured result.