Seca 284 - Page 8

Overview • 69
English
No. Control Function
1
Head slide Control for determining height
2
Keypad, head
slide
Controls for performing length/height measurements and
for configuring the device
3
Frankfurt
measure
Pull-out ruler for aligning the head according to the so-
called “Frankfurt Horizontal”.
4
Display, head
slide
Display element of the head slide for measured results
and for configuration
5
Battery
compartment,
head slide
Designed to take battery pack with 4 type AA batteries
(mignon), 1.5 V
6
Start key, head slide:
Switch head slide on and off
7
Arrow key (hold/zero)
•During measuring
-Press briefly: activate Hold function
-Hold down: set zero point
•In the menu:
-Select submenu, select menu item
-Set value (press briefly: value is changed by 1, press
for longer time: value is changed until key is released)
8
Enter key (send/print):
•During measuring (if wireless network is set up)
-Press briefly: Send measured result to ready to
receive devices (multifunctional display, wireless
printer, PC with USB wireless module)
- Hold down: print out measured result (wireless
printer)
•In the menu:
-Confirm selected menu item
-Save set value
9
Brake button
•Holds the head slide in position
•Pressed to move the head slide
10
Multifunctional
display
Central control and display element
11
Arrow key send
•During weighing (if wireless network is set up)
-Send measured result to receive-ready devices
(wireless printer, PC with USB wireless module)
•In the menu:
-Select submenu, select menu item
-Increase value (press briefly: value is increased by 1,
press for longer time: value is increased until key is
released)