Secutron MR-2200 User Manual

5
Operation and Programming Concepts
If there is break in a communications link (see Figure 2) the broadcast is disposed of by the
unit unable to pass it on. In the situation where a unit has been removed from the loop (see
Figure 3), the broadcast is passed only from com2 to com1 at the jump. In Figure 3, panel 5
passes the broadcast to panel 3, but panel 3 will not pass the broadcast on to panel 5 since it
is supposed to be communicating to panel 4.
Figure 3 Panel Removed from Network
1.4 Addressable Devices
1.4.1 Supported Devices
The MR-2200 can use analog/addressable devices. There are two general types of devices:
sensors and modules. The following devices are supported:
Modules
MRI-M500DM Dual Input Monitor Module
MRI-M500M Monitor module, Classes A/B initiating
MRI-M501M Mini Monitor module, Class B initiating
MRI-M502M
Monitor Module for 2- wire smoke detectors Classes A/B
initiating
MRI-M500S Control module
MRI-M500R Relay Module
MRI-M500X Fault isolator module
IM-10 Intelligent Input Monitor Module
CZ-6 Zone Interface Module
CR-6 Control Module Relay
SC-6 Supervised Control Module
MR2200
ID # 1
C O M 2 C O M 1
MR2900
ID # 2
C O M 2 C O M 1
MR2944
ID # 3
C O M 2 C O M 1
MR2200
ID # 5
MR2944
ID # 4
C O M 1 C O M 2C O M 1 C O M 2

Secutron MR-2200 Specifications

General

Brand	Secutron
Model	MR-2200
Category	Control Panel
Language	English