52
Appendix A: Condition Codes and Zone Numbers
4.0 Appendix A: Condition Codes and
Zone Numbers
4.1 Introduction
This appendix lists the condition codes and zone numbers used by the panel.
4.2 List of Codes and Zone Numbers
4.2.1 Condition Codes
The alarm list and archive use the following formats for condition codes.
A plus sign (+) refers to a new or on condition, a minus sign (-) refers to a restoral or off
condition, and an equal sign (=) refers to a one time event.
Archive Alarm List Description
A ALARM Alarm
B bypass Bypassed Circuit/Device
C com Comlink
D dupl Duplicate Addressable Device
E alert Maintenance Alert
G ground Ground Fault
H Hot Key Pressed
I ilgl Illegal Addressable Device
J Switch
M msng Missing Addressable Device
N nofire Non-Fire
P M.PULL Pull Station Alarm
S spv Supervisory
T trbl Trouble or Parameter Change
U wrong Wrong Device Type
W WFLOW Waterflow Alarm
X warn Pre-Alert
To Next Page
Loading...
