51
LCD Programming
The default Level 2 passcode is 2222. The default Level 1 passcode is 1111. These passcodes
should be changed to prevent unauthorized access.
There is a special Level 2 passcode that is variable from day to day. It can be obtained from
Secutron if the Level 2 passcode is forgotten.
3.3.11 Memory
This function is restricted to Privilege Level 2. This menu has the following options:
• Erase Configuration: This erases all initiating circuit, bell, relay, and privilege values
entered from the keypad and LCD menu, and replace them with default values. With
MR2 programs, this has no effect on information contained in the downloaded database.
Confirmation is asked before erasure. After the Configuration has been erased, the
panel must be reset using the reset button at the top of the Main Circuit Board, if the
panel does not do this automatically. The following items are not erased: Serial Number,
Clock Calibration, Level 1 Passcode, Level 2 Passcode, Main Board Type, Input Circuit
Modules.
To Next Page
Loading...
