reComputer R1000
© 2009-2024 Seeed Technology Co.,Ltd. All rights reserved.
Static power consumption test in shutdown and
power-off state.
To test the input current when supplying 24V power
to the reComputer R1000 device without running any
test programs.
Configure CPU to run at full load using the "stress -c
4" command. No external devices connected.
Power On and Power Off
The reComputer R1000 does not come with a power button by default, and the system will automatically start up once
power is connect- ed. When shutting down, please select the shutdown option in the operating system and wait for the
system to fully shut down before cutting off power. To restart the system, simply reconnect to the power.
To Next Page
Loading...
