reComputer R1000
© 2009-2024 Seeed Technology Co.,Ltd. All rights reserved.
2.2.5 USB
The reComputer R1000 is equipped with one USB Type-C port and two USB Type-A ports. Please refer to the table below
for their functions and descriptions.
Used for serial port debugging, burning
image, etc.
Connect different USB devices such as
flash drives, USB keyboards or mouses.
2.2.6 SIM Slot
The reComputer R1000 uses a standard-size SIM card slot commonly found in industrial applications, which requires a
standard SIM card with dimensions of 25mm x 15mm.
Please note that the standard version of reComputer R1000 does not come with a 4G module. If you require 4G
functionality, an additional 4G module must be purchased separately. For more information, please refer to section
"2.3.2 4G Module".
To Next Page
Loading...
