reComputer R1000
© 2009-2024 Seeed Technology Co.,Ltd. All rights reserved.
There are two main uses for SSD cards:
1.High Capacity Storage: SSD cards can be utilized for high-capacity storage needs.
2.Boot Drive with Image: Another usage involves using the SSD both as a highcapacity storage and for storing system
images, allowing booting directly from the SSD card.
It's important to note that not all SSD cards available in the market support the second usage. Therefore, if you intend
to use it as a boot drive and are unsure about which model to purchase, we recommend opting for our recommended
1TB SSD(SKU 112990267). This model has been tested and verified for boot functionality, reducing the risk of compatibility
issues and minimizing trial and error costs.
2.3.7 Encryption Chip TPM 2.0
The TPM features Infineon’s OPTIGA™ TPM SLB9670 which is compliant to the Trusted Computing Group (TCG) TPM 2.0
specification is recommended as encryption chip to the reComputer R1000. The chip features an SPI interface applied for
port J13 on board, to enable a root of trust for platform integrity, remote attestation, and cryptographic services.
Please refer to section 4.5 "Assemble TPM 2.0 Module" for instruction.
2.3.8 UPS
The UPS is 7F, which operates in series. The UPS module is positioned between the DC5V and CM4 components, with a G
PIO signal utilized to alert the CPU in the event of a power loss from the 5V supply. Upon receiving this signal, the CPU ex
ecutes an urgent script before the super capacitor's energy is depleted, initiating a "$ shutdown" command.
The backup duration provided by the UPS heavily relies on the system load. Below are some typical scenarios tested with
a CM4 module featuring 4GB RAM, 32GB eMMC storage, and a Wi-Fi module.
Testing under idle conditions with official
driver program loaded
For UPS function please contact us for more information, and the alarm signal is active LOW.
To Next Page
Loading...
