SeeedStudio reComputer R1000 - Specification

reComputer R1000
© 2009-2024 Seeed Technology Co.,Ltd. All rights reserved.
3
1.3 Specification
Parameter
Description
Hardware Specification
Product Series
R10xx-10
R10xx-00
CPU
Raspberry Pi CM4, Quad-core Cortex-A72@ 1.5GHz
Operating System
Raspbian, Debian
RAM
1GB/2GB/4GB/8GB
eMMC
8GB/16GB/32GB
System Specification
Input
2-pin Terminal Block
PoE(as powered device)
IEEE 802.3af Standard 12.95W PoE*
Supply Voltage(AC/DC)
12~24V AC/9~36V DC
Overvoltage Protection
40V
Power Consumption
Idle: 2.88W; Full Load: 5.52W
Power Switch
No
Reboot Switch
Yes
Interface
Ethernet
1 x 10/100/1000 Mbps(supports PoE*)
1 x 10/100 Mbps IEEE 802.3/802.3u
USB
2 x USB-A 2.0 Host
1 x USB-C 2.0 (For flashing OS)
RS485
3 x 3-pin Terminal Block (isolated)
SIM Card Slot
supports Standard SIM Card
M.2 Slot
supports M.2 NVMe SSD
LED
6 x LED indicators
Buzzer
1
Reset Button
1
HDMI
1 x HDMI 2.0
Speaker(reserved)*
supports Microphone*(on board within the enclosure)
Wireless Communication
Wi-Fi 2.4/5.0 GHz
On-chip Wi-Fi*
No
BLE 5.0
On-chip BLE*
No
LoRa®
USB LoRa®*/SPI LoRa®*
4G Cellular
4G LTE*
Zigbee
USB Zigbee*
Standards
EMC
ESD: EN61000-4-2, Level 3