reComputer R1000
© 2009-2024 Seeed Technology Co.,Ltd. All rights reserved.
Region optional LoRaWAN Gateway Module(SPI)-
EU868
Region optional LoRaWAN Gateway Module(USB)-
US915
Region optional LoRaWAN Gateway Module(USB)-
EU868
LoRa Antenna Kit - 868-915 MHz
Mini-PCIe USB Zigbee Module
Zigbee Antenna Kit for reComputer R
This accessory is required for
Wi-Fi function
Raspberry Pi Compute Module 4 Antenna Kit
4G antenna with 4G module
for 4G function, GPS antenna
with 4G module for GPS
function
LTE Cat 4 EC25-AFXGA-Mini-PCIe Module - for
North American
LTE Cat 4 EC25-EUXGR-Mini-PCIe Module - for
EMEA and Thai
LTE Cat 4 EC25-AUXGR-Mini-PCIe Module - for
Australia
LTE Cat 4 EC25-EFA-Mini-PCIe Module - for Thai
LTE Cat 4 EC25-EMGA-Mini-PCIe Module - for
Malaysia
LTE Cat 4 EC25-JFA-mini-PCIe
4G Antenna Kit for 4G module
GPS Antenna Kit for EC25 4G Module
TPM 2.0 Module with infineon SLB9670
512GB NVMe M.2 PCle Gen3x4 2280 Internal SSD
256GB NVMe M.2 PCle Gen3x4 2280 Internal SSD
128GB NVMe M.2 PCle Gen3x4 2280 Internal SSD
This module needs to be
soldered onto the carrier
board of the reComputer
R1000
MQ7813T120 PoE Module Kit for reTerminal DM
SuperCAP UPS LTC3350 Module
The reComputer R1000 mainboard features two Mini-PCIe slots. Mini-PCIe slot 1 supports 4G module, LoRa® module using
the USB protocol and Zigbee module using USB protocol; while Mini-PCIe slot 2 supports LoRa® module using the USB
and SPI protocol and Zigbee module using USB protocol. Additionally, 4G module and LoRa® module shouldn't be used at
the same time, can not plug in two LoRa® modules on board.
Can not plug in 2 LoRa® modules on board.
2.3.1 Wi-Fi/BLE
The reComputer R1000-10 is powered by the CM4 with an onboard Wi-Fi/BLE version, providing the same Wi-Fi/BLE
parameters as the CM4. For detailed parameter information, please refer to the Raspberry Pi official website.