1
Locate the parts to assemble the ASSY BILLBOARD within the INST KIT BOX.
2
Fit the BILLBOARD COVER to the BILLBOARD SURROUND and x from the rear using (4) M5x25
HEX BLT PAS, (4) M5 SPRING WSHR (4) M5 FLT WSHR and (4) SPACER STAND OFF LONG.
6-1-1 ASSEMBLING THE BILLBOARD
DB-0501UK - BILLBOARD SURROUND (1)
DB-0502UK BILLBOARD COVER (1)
DB-0503UK BILLBOARD FRONT FACE (1)
M5x25 BLT, , M5 SPRING WSHR & M5 FLT WSHR
M5 SPACER STANDOFF LONG
3
Fit the BILLBOARD FRONT FACE to the M5 SPACER STANDOFF LONG. Place the (4) M5 WSHR
SPECL AL over the STANDOFF LONG and secure using the (4) M5x10 SKT CAP CRM.
M5X10 SKT CAP CRM
BILLBOARD FRONT FACE
M5 WSHR SPECL AL
Please note - Take not to overtighted xings as it may damage the acrylics.
To Next Page
Loading...
Need help?
General
