CALIBRATION
Select CALIBRATION from the TEST MENU to display the CALIBRATION menu.
This test is used to calibrate the levers and set the offset levels for the top and bottom wheels.
CALIBRATE LEVERS
This test will allow for the levers to be calibrated and ensure reliable game
play.
When rst selecting CALIBRATE LEVERS an instruction will be displayed, PLEASE WAIT, during this time the
levers are being unlocked.
The next step requires both levers to be pulled and held at their lowest position.
Wait until instructed to release the levers. When the calibration is complete the message DONE! is displayed.
SET TOP OFFSET
SET BOTTOM OFFST
EXIT CALIBRATION
Press the TEST button to exit CALIBRATION and return to the TEST MENU.
TEST MENU
6.CALIBRATION
CALIBRATION
CALIBRATE LEVERS
CALIBRATION
PULL BOTH LEVERS
CALIBRATION
DONE!
To Next Page
Loading...
