ASSEMBLY AND INSTALLATION
25
6
● Use the power supply equipped with an earth leakage breaker. Use of power
supply without such a breaker could result in fire if there is a current leakage.
● This product MUST be earthed. Operating this product without an earth
connection will result in either a fire hazzard, or Severe electric shock. .
● Do not expose the power cords. If these are exposed, customers could stumble
over them, for instance, and easily damage them. Additionally, if these lines
are damaged, there could be a risk of electrical shock or short circuit. Set these
lines at locations where they will not interfere with customer traffic, or attach
covers to them.
● After laying out the power cord on the floor, be sure to always protect it. If the
power cord is left exposed, it can easily be damaged, resulting in electrical
shock.
● Only use the Power Cords supplied with this product. If a Power Cable is to be
replaced, be sure to replace it with one of the same rating and specification.
5 APPLYING POWER FOR THE FIRST TIME
To Next Page
Loading...
Need help?
General
