www.seuservice.com
44
VOLUME SETTING
Performing settings while riding on the Ride is dangerous as the Ride moves. Use
the Start button instead of Test button, and the View button instead of Service
button.
When V. R. adjustment or replacement has been made, be sure to perform the
setting in that particular V. R. value setting item.
In this setting item, each V. R. value of the Handlebars, Roll, and Throttle can be set.
FIG. 9. 3 e a VOLUME SETTING Screen
VOLUME SETTING
> HANDLE BAR
ROLL
THROTTLE LEVER
EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
To Next Page
Loading...
