Sega WaveRunner - Handle Mechanism; Throttle V.R. Adjustment;Replacement

www.seuservice.com
65
Take out the 3 truss screws. (Photo 11.1b)
PHOTO 11. 1 b
TRUSS SCREW (3),black
M5 X 12
Remove Step L slowly. Use care when removing the Step L so as not to damage the wiring inside
the Lid. Removing the Step L, the Regulator is appeared. (Photo 11.1c)
Pull off the 2 Connectors. (Photo 11.1c)
PHOTO 11. 1 c
STEP L
CONNECTOR (2)
5
6
7