Segway AT5 S - Oil Strainer Clean

99
1
2
3
4
5
OIL STRAINER CLEAN
The oil filtration on this engine is a two-stage filtration system.
The oil strainer (pre-filter) is designed to trap large foreign objects.
Replace the oil according to the Maintenance Schedule. Also use
Segway approved oil that is designed for 4-stroke engines.
1
Bolt M6x25 (4x)
2
Strainer cover
3
O-ring seal
4
Strainer spring
5
Oil strainer
The oil filter can be checked after the oil is discharged. If cleaning
is needed, please take the following steps:
1. Remove 4 bolts.
2. Remove the strainer cover, O-ring seal and strainer spring in
turn.
3. Take out the oil strainer for cleaning.
4. Strainer installation is reverse of the removal.
MAINTENANCE, STORAGE AND TRANSPORTATION