BASIC DRIVING GUIDE
TRAIL
ETIQUETTE
Always practice good etiquette when driving. Allow a safe
distance between your vehicle and other vehicles in the same
area. Communicate with oncoming operators by signaling the
number of vehicles in your group. When stopping, move your
vehicle to the edge of the trail to allow others to pass safely.
KNOW YOUR RIDING AREA
Familiarize yourself with all laws and regulations concerning the
operation of this vehicle in your area. Respect the environment in
which you ride your vehicle.
Find out where the designated driving areas are by contacting
your dealer, a local riding club or local officials. Help keep our
trails open for recreational vehicle use.
VEHICLE BREAK-IN PERIOD
Your vehicle's run-in period is the
first 300 km
of operation. It
is important for you to ride in single person and to perform
proper run-in period. Careful running-in of the new engine and
drive train components will improve the performance and service
life of these components. Follow these steps carefully.
BREAK-IN PROCEDURE FOR BRAKE SYSTEM
In order to achieve the best brake performance of the new
vehicle, the brakes must be broken-in properly.
The brake system
needs
200 km
run-in period.
To Next Page
Loading...
