EMERGENCY JUMP START
Jump starting is not recommended. Its always better to charge the
vehicle´s battery. If you have to jump-start your vehicle, make sure
you follow this procedure:
2.
Connect the clamp of the positive jumper cable to the
special jumper starting terminal of the vehicle.
3.
Connect the clamp on the other end of the positive cable
to the positive (+) terminal of another vehicle.
4.
Connect the negative cable clamp to the negative
battery terminal of another vehicle.
5.
As shown, connect the clamp on the other end of the
negative cable to a separate clamp
.
6.
Connect jumper cable terminals firmly to unpainted solid metal.
To Next Page
Loading...
