BATTERY REMOVAL
The battery is located below the seat. Cut off the power before
removing battery
.
1
Bolt M8x12 (2x)
2
Battery holder
3
Protective rubber sleeve
4
Cable anchor bolt (x2)
5
Cable anchor nuts (x2)
1.
Use a tool to remove the battery holder bolt M8×12.
2.
Remove the battery holder.
3.
Turn up the positive and negative protective rubber sleeves.
4.
Remove the battery negative screw and nut and disconnect the
black (negative) battery cable.
5.
Remove battery positive screw and nut and disconnect red
(positive) battery cable.
6.
Remove the battery from the ATV.
To Next Page
Loading...
