When adjusting spring preload, always adjust the left
and right
shock absorbers to the same position. Step up or down
one
position at a time during adjustment. Do not try to make large
adjustments which may damage the shock absorber.
SUSPENSION ADJUSTMENT
There are different types of shock absorbers fitted in ATVs,
depending on configurations. Adjust the shock absorber
according the actual type fitted in your ATV.
OIL SHOCK ABSORBER
1.
There are 5 spring preload positions, which are suitable for
different loads or riding conditions.
Position
1 :
For light load or flat terrain.
Position
2 :
STANDARD position.
Position
3
~
5 :
When ATV load is heavy, adjust spring adjuster
to this position.
2.
Use hook wrench
6
to adjust the spring preload.
To Next Page
Loading...
