The vehicle must be stopped to engage or disengage 2WD/4WD switch.
Mechanical damage may occur if switch is engaged
or disengaged when riding.
TWO OR FOUR WHEEL DRIVE SWITCH
(WITH REAR DIFFERENTIAL)
3
4
1
2
1
Drive mode selection handle
2
Front differential lock button
Two-wheel drive position
4
Four-wheel drive position
Rear differential lock button
Rear differential not locked
Rotate the selection
handle to the "
" position
Rear axle differential
lock button " "
press
2×4
two-
wheel
drive
mode
The two-wheel drive mode is turned
on, and the whole vehicle is driven by
the rear wheels only, front wheels have
no power output. This mode is suitable
for driving on smooth roads.