Appendix II Connector welding
instructions
(I) Preparatory work
1、 Tools
Electric soldering iron, solder wire
2、 Materials
8pin connector, 2pin connector, 2 AWG16 cables, 8 AWG26
cables, as shown in Figure 1.
Figure 1
(II) Welding instructions (take 8pin connector as an example)
1. Figure 2 shows the 8pin connector received by the customer.
Screw the connector from the position shown by the red arrow to
disassemble it into the state shown in Figure 3;
Figure 2
To Next Page
Loading...