Seiko S141 - Memory Recall: Single Mode; Recalling Data (Stopped;Reset)

9
English
• Up to 300 lap/split time data of one measurement can be stored in memory and recalled on display.
• With each press of “C,” the stored data is recalled.
The data can be recalled successively one after another by keeping “C” pressed.
• The stored data can be recalled even during measurement (while the stopwatch is measuring).
• Memory recall sequence
When the stopwatch is stopped, with each press of “C,” the stored data will be recalled from the first (oldest) to the last (newest) data.
When the stopwatch is measuring, with each press of “C,” the stored data will be recalled from the last (newest) to the first (oldest).
MEMORY RECALL FUNCTION ------- SINGLE MEMORY MODE
* The data can be recalled successively by keeping “C” pressed.
* To stop the recall of the data when the stopwatch is stopped, press “A”, “B” or “D.”
To stop the recall of the data when the stopwatch is reset, press “A” or “D.”
● With each press of “C,” the data is recalled chronologically (starting from the first/oldest data).
Ex.: When the stopwatch is reset to “00” after the measurement
C
Reset First lap time Split & lap times Stop time
❍ MEMORY RECALL WHEN THE STOPWATCH IS STOPPED OR RESET
RECALL mark appears while the stored data is being recalled on display.
The mark shows the memory recall sequence (descending/ascending).
Lap/Split
number
Split time
Lap time
• When a new measurement is
commenced, the lap/split time data
obtained from the previous
measurement will be automatically
deleted.