8. Technical Data
Type • Digital exposure meter for ambient and flash light
Light receiving method • Incident light and reflected light
Light receiving section • Incident light: Lumisphere, Lumidisc
• Reflected light: Lens (light receiving angle of 40°)
Light receptor • Silicon photo diode
Measuring modes • Ambient light: Shutter priority metering
EV metering
• Flash light: With synchro cord
Without synchro cord
Measuring range • Ambient light: EV0 to EV19.9
(ISO 100) • Flash: F1.4 to F90.9
Repeat accuracy • ± 0.1 EV or less
Calibration constant • Incident light metering: C = 340 (Lumisphere), C =250 (Lumidisc)
• Reflected light metering: K = 12.5
Display range • Film speed: ISO 3 to 8000 (1/3 step)
• Shutter speed
Ambient light: 60 sec to 1/8000 sec (in 1, 1/2 or 1/3 step)
Cine speed (f/s): 8, 12, 16, 18, 24, 25, 30, 32, 64, 128
(shutter angle: 180 degrees)
Flash: 1 sec to 1/500 sec (in 1, 1/2 or 1/3 steps)
and 1/75, 1/80, 1/90, 1/100 sec
• Aperture value: F0.5 to F90.9 (in 1, 1/2 or 1/3 steps)
• EV (exposure value): EV - 5 to EV26.2 (in 1/10 step)
Other functions • Out-of-range indication:
E.u (underexposure) and E.o (overexposure) warnings
• Battery check indication with 3 level status icon
• Auto power OFF (approx 4 min after last operation)
• Custom setting
Battery used • Type-AA 1.5-volt battery (alkaline, manganese or lithium)
Operating temperature range • 0°C to +40°C
Storage temperature range • -20°C to +60°C
Dimensions • Approx 63W x 110H x 22D mm
Weight • Approx 95g (battery included)
Standard accessories • Soft case, strap, Lumidisc, soft case for Lumidisc, synchro terminal
cap, type-AA 1.5-volt battery
Features and specifications are subject to change without notice.