3. Before Using
WARNING
1. Attach the strap
1) Attach the Strap !5 by passing the small end
loop through the strap eyelet !2 and passing the
other end of strap through it.
● Please place in a location where an infant cannot reach and
accidentally get the strap wrapped around his or her neck.
There is danger of strangulation.
2. Inserting the battery
1) Requires type-AA 1.5-volt manganese dry cell
battery (R6P) or type-AA 1.5-volt alkali dry cell
battery (LR6) or type-AA 1.5-volt lithium dry cell
battery (FR6).
Do not use any battery other than the designated
types.
2) Slide down the battery compartment cover !1 in
the direction of the arrow to remove.
3) Insert the battery observing the polarity with the
+, - marks in the battery compartment.
4) Align battery compartment cover with main unit
and slide shut.
Make sure that the cover is properly in place and
closed.
NOTE: ● Nickel and cadmium storage batteries (NiCd) and nickel and
hydrogen batteries (NiH) cannot be used.
● Remove battery if meter is not used for an extended period.
Batteries can leak and damage the exposure meter. Dispose of
used batteries properly.
● If the LCD does not light, check that the battery capacity is
sufficient, and check that the battery positive and negative
terminals are not reversed.
To Next Page
Loading...
Need help?
General
