3
2. About Godox Radio System
●
2.
About Godox Radio System
2-1 Overview
Triggering and controlling Godox Wireless Flash require using Godox Wireless Flash units
receiver attached or installed. Once the transmitter module is installed in your L-858D,
you will be able to adjust the power level and trigger ashes to get the look you desire.
For more information about the meter, refer to the L-858D Operating Manual.
For more information about Godox Wireless radio systems, go to http://www.godox.com/
EN/index.html
NOTICE
Successful radio triggering depends on several factors. Please read these setup steps
before using the L-858D to radio trigger ash units.
1. It is the best to position the meter in sight of the radio receiver (or ash head).
2. Position the radio receiver so that it is away from large metallic objects, concrete, or
containers of water (like people).
3. Sometimes, conditions do not allow radio reception. These could include strong
local radio interference or being near objects that block or absorb the signal.
Repositioning the radio, even slightly, can reestablish contact. Alternatively, check to
see if the radio receiver is behind objects that absorb or block radio waves, such as
concrete, metal or low hill.
4. Operation is the best when the meter to receiver distance is within 30 meters (100
feet).
To Next Page
Loading...