Sekonic RT-GX - Intended Use; Intended Users; Disclaimer

iii
NOTICE
● Check if L-858D rmware is the latest version by using "Update Settings" function of
Data Transfer Software connected with L-858D.
● Download the Data Transfer Software from www.sekonic.com, and install it on your
computer.
URL: https://www.sekonic.com/support/downloads/dtssoftwareformacandwindows.aspx
To use this software, connect your computer to the L-858D using a USB cable (micro-B
type, available commercially).
■
Intended Use
This product can be used in the following situations.
●
Radio wave-based ash light triggering or output power control
●
Radio wave-based modeling lamp ON/OFF or output power control
■
Intended Users
The intended users of this product are those who are engaged in shooting or related
businesses, such as photographers, who use the ash units.
■
Disclaimer
The Company shall not be liable for any direct or indirect damage resulting from the
failure of this product or its use.