Sekonic RT-GX - Radio Triggering Flash Mode

13
2. About Godox Radio System
●
2-4 Measuring
Radio Triggering measurement is available in the following modes:
●
Radio Triggering Flash Mode
●
Radio Triggering Multiple (cumulative) Flash Mode
●
HSS (High Speed Synchro) Flash Radio Triggering Mode
●
Flash Duration Analysis Radio Triggering Mode
2-4-1 Radio Triggering Flash Mode
The meter detects ash brightness after Measuring Button is pressed to send radio
transmitted signal to radio receiver connected to ash. F-stop value is displayed for input
ISO sensitivity and shutter speed. Depending on the radio system in use, the meter
controls the output power of ash units and the modeling lamps with turning ON/OFF.
Operation
1)
How to use Flash Triggering
1.
Touch the [Measuring Mode] Icon on the Measuring Mode Screen.
The Measuring Mode Screen is displayed.
2.
Touch the [Radio Triggering Flash Mode] Icon ( ) in
Measuring Mode Screen.
When it is selected, the display changes to the Measuring Screen.
[Measuring Screen] [Measuring Mode Screen] [Measuring Screen]
[Measuring Mode] Icon