Sekonic RT-GX - HSS Flash Radio Triggering Mode

28
2. About Godox Radio System
●
2-4-3 HSS (High Speed Synchro) Flash Radio Triggering Mode
Select this mode to measure the brightness of a ash activated in HSS (High Speed
Synchro) mode.
Detects ash brightness after Measuring Button is pressed to send radio transmitted
signal to radio receiver connected to ash. Displays F-Stop value.
Depending on the radio system in use, the meter controls the output power of ash unit.
Operation
1)
How to use Flash Triggering
1.
Touch the [Measuring Mode] Icon on the Measuring Screen.
The Measuring Mode Screen is displayed.
2.
Touch the [HSS (High Speed Synchro) Flash Radio Triggering
Mode] Icon ( ) in Measuring Mode Screen.
When it is selected, the display changes to the Measuring Screen.
3.
Set the light receiving method.
Switch to the incident light, extended lumisphere ( )/retracted lumisphere
( ), or reected light.
[Measuring Screen] [Measuring Mode Screen] [Measuring Screen]
[Measuring Mode] Icon