Sekonic RT-GX - Page 44

36
2. About Godox Radio System
●
4.
Set the ISO sensitivity value on the [ISO]
Icon.
5.
Set the shutter speed on the [T] Icon.
NOTICE
Make sure that the settings are within the specications of the camera and ash system.
6.
Set the Flash Duration Analysis t value. ( P43)
7.
Make sure that the set CH (channel), Group and Wireless ID
are the same between the light meter and the receivers in use.
(P4, P8, P11)
[Measuring Screen]
Setting Value
Wireless ID
[Measuring Screen]
Radio CH/Group