38
2. About Godox Radio System
●
NOTE
● For red-eye prevention and auto-ash light adjustment, some devices can pre-ash before
main ash burst. With the normal setting, the light meter will measure the pre-ash bursts and
not the main ash burst. To take a successful reading, activate the pre-ash feature in the
Tool Box. Please refer to the L-858D Operating Manual.
● When the measured value display area is touched, both ash waveform graph and measured
value are displayed. When it is touched again, the display returns to the previous screen.
● Measure the ash light characteristics in a darkroom without ambient light.
● For radio CH frequencies, refer to “5. Radio Channel Frequencies”. (
P48)
[Measuring Screen]
[Flash Duration Analysis Mode
Flash Waveform Graph Screen]
Touching the
Measured
value area
changes the
display.
* The graph screen cannot be used to make measurements.
To Next Page
Loading...