Selve i-R Timer Plus - SETTING Menu

SETTING MENU
The SETTING menu gives you the following options:
• HOLIDAY SETTING
• SUN (when sensor is connected)
• TWILIGHT SETTING (when sensor is connected)
• INTERMEDIATE POSITION
• VENTILATION/TILT
• PROG 1 (END LIMIT, INTERMEDIATE POSITION,
VENTILATION/TILT)
• PROG 2 (END LIMIT, INTERMEDIATE POSITION,
VENTILATION/TILT)
• TEST MODE (when sensor is connected)
• Language (GB ENGLISH)
• ASTRO SHIFT ▲
• ASTRO SHIFT ▼
• City (LONDON)
• LONGITUDE
• LATITUDE
• TIME ZONE
• SUMMER/WINTER (automatic clock adjustment for daylight
saving changes)
To set a function, press the OK button until you come to the re-
quired menu level.
HOLIDAY SETTING
The holiday setting simulates an occupied house while you are on
holiday.
If the function is activated (ON), the roller shutter/venetian blind
varies randomly from the programmed times (max.+ 30 mins.).
END LIMIT
The end limit is the point where the roller shutter/venetian blind is
in the upper or lower end position.
GB
Explanation of functions/terms used
58
Only when
EXPERT MODE is ON
}