EasyManua.ls Logo

Selve i-R Timer Plus - Changing the Battery; General Conformity Declaration; Maintenance; Technical Data

Selve i-R Timer Plus
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Changing the battery
Note: Change the batteries within
one minute.
1. Take out the batteries.
2. Insert the new batteries in the
correct position.
Maintenance
Clean the device with a damp cloth only. Do not use a cleansing agent
since this could damage the plastic.
Technical data
Nominal voltage: 3 V DC
Battery type: LR 03 (AAA)
System of protection: IP 20
Permissible
ambient temperature: 0 to +55 °C
Installation: Wall mounted
Radio frequency: 868,3 MHz
The maximum radio range is up to 25 m indoors and up to 350 m in
the open.
Subject to technical modifications.
General conformity declaration
The company SELVE GmbH & CO. KG, hereby declares that the
i-R Timer Plus is in conformity with the basic requirements and other
relevant provisions of the Directive 1999/5/EC.
GB
Changing the battery/Technical Data
82

Table of Contents