Expand Boom
7
English
3 PAIRING THE EXPAND BOOM WITH
BLUETOOTH DEVICES
Before using the Sena Expand Boom headset with any Bluetooth
device for the rst time, you need to do the pairing operation. It can be
paired with Bluetooth mobile phones, Bluetooth stereo devices such
as MP3 and with a Bluetooth adapter or transmitter such as Sena SR10
or SM10. This pairing operation is only required once for each
Bluetooth device. The headset will remain paired with the devices and
automatically connects to the paired devices again when they are
within range. You will hear a high tone single beep and a voice prompt
when the headset connects to a paired device automatically: “Phone
connected” for a mobile phone, or “Media connected” for a Bluetooth
stereo device.
3.1 Mobile Phone Pairing
There are three ways to pair the phone.
3.1.1 Initially Pairing the Expand Boom
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situations:
• Rebooting after executing the Factory Reset feature; or
• Rebooting after executing the Delete All Pairings feature.
1. Press and hold the Center Button and (+) Button for 1 second.
You will hear a voice prompt, “Phone pairing”.
2. Search for a Bluetooth device on your mobile phone. Select the
Expand Boom in the list of devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for a
PIN.
Note:
To cancel phone pairing, tap the
Center Button
.
To Next Page
Loading...
