Sena Expand Boom - Multipoint Device Pairing

Expand Boom
8
3.1.2 Pairing When the Expand Boom is Turned Off
1. Press and hold the Center Button and (+) Button for 5 seconds
when the Expand Boom is turned off. You will hear a voice
prompt, “Phone pairing”.
2. Search for a Bluetooth device on your mobile phone. Select the
Expand Boom in the list of devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for a
PIN.
3.1.3 Pairing When the Expand Boom is Turned On
1. Press and hold the Center Button for 8 seconds when the
Expand Boom is turned on. You will hear a voice prompt, “Phone
pairing”.
2. Search for a Bluetooth device on your mobile phone. Select the
Expand Boom in the list of devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for a
PIN.
3.2 Multipoint Pairing
Typical Bluetooth headsets can connect with only one HFP (Hands-
Free Prole) device, but multipoint pairing allows the headset to
connect with two HFP devices at the same time. So, when you already
have a mobile phone connected with the Sena Expand Boom, you can
also pair and connect a second mobile phone or other HFP device
such as the Sena SR10, Bluetooth adapter.
1. To enter the voice conguration menu, press and hold the
Center Button for 12 seconds until you hear a voice prompt,
“Conguration menu”.
2. Tap the (+) Button until you hear a voice prompt, “Multipoint
pairing”.
3. If you want to pair a second mobile phone, search for the Bluetooth
device on your mobile phone, and select the Sena Expand Boom
in the list of devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5. The mobile phone conrms that pairing has completed and the
Sena Expand Boom is ready to use. You will hear a voice prompt,
“Your headset is paired”.
6. If you want to pair the Sena SR10, Bluetooth adapter, please refer
to the section
3.4, “Pairing with the Sena SR10 Bluetooth Two-way
Radio Adapter”.