Sena M1 - Universal Intercom

M1 Smart Mountain Bike Helmet | 22
6 BLUETOOTH INTERCOM
6.6 Universal Intercom
Universal Intercom allows you to have intercom conversations with
users of non-Sena Bluetooth headsets. You can pair the Bluetooth
system with only one non-Sena headset at a time. The intercom distance
depends on the performance of the Bluetooth headset to which it’s
connected. When a non-Sena Bluetooth headset is paired with the
Bluetooth system while another Bluetooth device is paired via Second
Mobile Phone Pairing, it will be disconnected.
1. Access Universal Intercom Pairing in the Bluetooth System
Configuration Menu.
=
15s
HOLD
=
2x
TAP
=
1x
TAP
2. Put the non-Sena Bluetooth headset in Pairing Mode. The Bluetooth
system will automatically pair with a non-Sena Bluetooth headset.
3. You can have Two-Way Intercom or Multi-Way Intercom
communication with up to three Intercom Friends using non-Sena
headsets by following the procedures described below.
Three-Way Universal Intercom
YOU
Non-Sena Headset
Sena Headset
Four-Way Universal Intercom
YOU
Non-Sena
Headset
Sena
Headset
Non-Sena
Headset
Note: Some non-Sena headsets may not support Multi-Way Universal
Intercom.