Sena PRISM - Timelapse Mode Settings

PRISM
25
English
7.2 Timelapse Mode Settings
SET
Timelapse mode takes a shot at 1, 3, 5, 10, 30 or 60 second intervals. If the type is set to video,
all shots taken are stored as a single video. If the type is set to photo, all shots are stored as
individual photos. Timelapse video resolutions are 1,080p / 30fps and 720p / 30fps. Timelapse
photo resolutions can be changed in the single shot settings. Each resolution has a xed aspect
ratio. If the single shot resolution is set to 5M (16:9), timelapse photo will take shots in 3M (16:9).
Timelapse photo does not support 5M (16:9).
Type Resolution
Video
1,080p / 30fps
720p / 30fps
Photo
3.5MP (3:2)
3.2MP (4:3)
3.0MP (16:9)
Sequence Interval
1 sec
3 sec
5 sec
10 sec
30 sec
60 sec