PRISM
40
10.3 Settings of Bluetooth Audio Recording
You can record your voice in either Ultra HD Audio Mode or Normal Audio Recording mode. Ultra HD
Audio Mode enables you to record your voice in CD-quality with live ambient sound. It is available
only when a single Sena headset is connected to the camera. It is not supported in multi-way
intercom or for non-Sena headsets. Normal Audio Recording mode has the option of Advanced
Noise Control only for Sena headsets.
Customize your audio to record the desired sound. The internal microphone is more focused on
ambient sound while the Bluetooth microphone is more focused on your voice. You may choose
to turn them on or off. You may set the internal microphone gain to Low or High. You may choose
between Ultra HD Audio Mode or Normal Audio Recording mode for the Bluetooth microphone.
Parameter Value Menu
Internal
Microphone Gain
Amount of audio from
camera microphone
Off-Low-High
Settings
→ Audio Settings →
Internal Microphone Gain
Bluetooth Audio
Recording Mode
Audio recording
mode of camera
Ultra HD Audio Mode-
Normal Audio Recording
(Advanced Noise Control*)
Settings
→ Audio Settings →
Ultra HD Audio Mode
Note:
If you have a Bluetooth headset connected to your camera, it is recommended to turn off the internal
microphone (please refer to
section 9.3, “Audio Settings”
). Bluetooth microphone records your voice
and the ambient sounds with a good balance. At high speeds, the internal microphone may record
excessive wind noise.
To Next Page
Loading...
