Sena PRISM - Bluetooth Audio Recording with Non-Sena Headsets

PRISM
39
English
3. The pairing is completed when the headset’s LED ashes blue. You will hear the voice prompt
say “Prism connected” from the connected Sena headset.
4. You can start recording your voice using your Sena headset once it is paired and connected
with the camera. When you are in an intercom conversation with another Sena headset, you can
record their conversations.
10.2 Bluetooth Audio Recording with Non-Sena Headsets
Camera Settings → Device Settings → Bluetooth Headset Pairing
Non-Sena Headset Phone Pairing
1. Perform Bluetooth pairing from the camera from the menu operation of Settings → Device
Settings → Bluetooth Headset Pairing.
2. Enter into the handsfree pairing mode of the non-Sena headset. For details on handsfree pairing,
refer to the User’s Guide of the corresponding headset.
3. If the pairing is completed, you will hear the voice prompt say “Prism connected” from the
connected corresponding headset.
4. You can start recording your voice using the headset once it is paired and connected with the
camera.
Note:
1. If you cannot pair the non-Sena Bluetooth headset, delete the pairing list and pair the non-Sena
Bluetooth headset again.
2. You can open or close the audio channel between the camera and the headset by making a phone
call on the headset. Please refer to the headset User’s Guide for more information.