PRISM
62
SAFETY INFORMATION
Please ensure that the product is properly used by observing
the warnings and cautions below to prevent any risk and/or
damage to property.
Product Storage and Management
• Keep the product free of dust. It may damage mechanical and
electronic parts of the product.
• Do not store the product in high temperatures as this may
reduce the life span of electronic devices, damage the
battery, and/or melt plastic parts of the product.
• Condensation may form in and on the product when you
expose your product to sudden changes in temperature or
when you use your product in a hot place, such as:
(1) When you take your product outside from an air-
conditioned room
(2) When you bring your product from the cold place to a
warm place
(3) When you use your product in a hot, humid place
(4) When you use your product after it rains
• To prevent condensation from forming, put your product inside
a plastic bag and tightly seal it. Remove your product from the
plastic bag after the temperature inside the bag is similar to
the external temperature.
• Do not clean the product with cleaning solvents, toxic
chemicals, or strong detergents as this may damage the
product.
• Do not paint the product. Paint may obstruct moving parts or
interfere with the normal operation of the product.
• Do not drop or otherwise shock the product. It may damage
the product or its internal electronic circuits.
• Do not disassemble, repair or modify the product as this may
damage the product and invalidate the product warranty.
• Do not store the product in humid environments, especially
for long time storage.
• Do not store the camera in proximity to magnetic elds. Doing
so may result in camera malfunction.
• Be careful to protect the lens by avoiding rough handling or
physical shock.
• Wipe the surface of the lens with a soft cloth in the following
situations:
(1) When there are ngerprints on the lens surface
(2) When the lens is used in hot or humid environments, such
as near oceans or rivers
• Store the product in a well-ventilated room to protect the lens
from dirt and dust.
• Never leave the product with the lens facing the direct
sunlight. Doing so may result in a re due to the sunlight being
concentrated by the lens.
Product Use
• When relevant, follow all regulations regarding the use of the
camera.
(1) Do not use your camera in an aircraft, unless permitted.
(2) Turn off the camera when you are near medical equipment.
Your camera can cause interference with medical devices
in hospital or healthcare facilities.
• The camera generates a low level magnetic eld. Keep a safe
distance between the camera and cardiac pacemakers to
avoid potential interference. Turn off the camera immediately
if your camera indicates interference with a pacemaker and
contact the pacemaker manufacturer or a physician.
• Avoid interference with other electronic devices. Your camera
generates a low level magnetic eld that may interfere with
unsealed or improperly shielded electronic equipment
in homes or vehicles. Consult the manufacturers of your
electronic devices to resolve any interference problems you
experience.
To Next Page
Loading...
