PRISM
38
10. BLUETOOTH AUDIO RECORDING
With the use of Bluetooth headsets, the camera allows users to add their voice to the video on-the-y
using the Bluetooth Audio Recording
™
feature. Being able to narrate the video during recording not
only provides users a whole new experience but also reduces the need for follow-up audio editing
providing real-time audio experiences. To make the recording sound as clear as possible, you have
to keep the space between the camera and the Bluetooth headset clear of obstacles.
To record your voice to the camera with a Bluetooth headset, you should pair the camera with a
Bluetooth headset (or microphone). After the initial Bluetooth pairing, the camera will remain paired
with the headset and automatically reconnect with it when within the connection range.
10.1 Bluetooth Audio Recording with Sena Headsets
Camera Settings → Bluetooth Settings → Bluetooth Headset Pairing
Sena Headset
Intercom Pairing (Jog Dial 5 sec or Center Button 5 sec)
Status LED
Camera: LED ashes red and blue.
Headset: LED ashes red.
1. Perform Bluetooth pairing from the camera from the menu operation of Settings → Device
Settings → Bluetooth Headset Pairing.
2. Place the headset into intercom pairing mode. Then the headset will be paired automatically with
the camera. You do not need to press any buttons for pairing. For details on intercom pairing,
refer to the User’s Guide of the Sena headset.
To Next Page
Loading...
