Sena PRISM - Page 42

PRISM
42
Camera Function Jog Dial Type Three Button Type Handlebar Remote
Timelapse Stop
Press and hold Jog Dial
for 1 sec
Press and hold Center
Button for 1 sec
Press the Joystick for
1 sec
Awake
Triple tap the Phone
Button
Press and hold the
(-) Button for 3 sec
Triple tap the Rear Button
Deep Sleep
Triple tap the Phone
Button
Press and hold the
(-) Button for 3 sec
Triple tap the Rear Button
Reconnect
Triple tap the Phone
Button
Tap the (+) Button and
(-) Button
Triple tap the Rear Button
Still Shot While
Recording
Tap the Phone Button
Press and hold the
(+) Button for 1 sec
Tap the Rear Button
Note:
1. If you powered off the camera using camera button control, you cannot power on the camera using
the Bluetooth Remote Control. Use the camera buttons to power it back on.
2. The Handlebar Remote needs to be connected to the headset paired with the camera to use
Bluetooth Remote Control.