Sena PRISM - Page 53

PRISM
53
English
14.2.1. Top Surface Mount
The QRM Top Surface Mount enables you to mount your camera on a at or curved surface such
as windshield, gas tank and a helmet. You can adjust the camera angle by rotating the ball joint on
the QRM body. When you are not using the camera, you can simply separate the camera-attached
QRM head from the QRM body.
14.2.2. Handlebar Mount
The QRM Handlebar Mount enables you to mount the camera on your motorcycle’s handlebar
(between 7/8’’ and 1 1/2’’ diameter). You can choose the directions of the mounting arm and the
U-bolt to best t the mount on your handlebar. When you are not using the camera, you can take out
the camera-attached QRM head from the QRM body.