SRL2
18
4.1 Mobile Phone Pairing
1. Turn on the SRL2 and press the Center Button for 12 seconds until
you hear high-toned double beeps. You will hear a voice prompt
saying “Conguration menu”.
2. Within 2 seconds, tap the (+) Button until the LED ashes red and
blue alternately and you hear multiple beeps. You will hear a voice
prompt saying “Phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the
Sena SRL2 in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5. The mobile phone conrms that pairing has been completed and
the SRL2 is ready to use. You will hear a voice prompt from the
SRL2 saying “Your headset is paired”.
6. If the pairing process is not completed within three minutes, the
SRL2 will return to stand-by mode.
4.2 Second Mobile Phone Pairing
Typical Bluetooth headsets can connect with only one Bluetooth
device, but a second mobile phone pairing allows the headset to
connect with another Bluetooth device such as a second mobile
phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter.
1. To pair the second mobile phone, press the Center Button for 12
seconds until you hear high-toned double beeps. You will hear a
voice prompt saying “Conguration menu”.
2. Within 2 seconds, double tap the (+) Button, then the LED turns to
blue ashing and the beeps turn to high-toned double beeps. You
will hear a voice prompt saying “Second mobile phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the
Sena SRL2 in the list of the devices detected on the mobile phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5. The mobile phone conrms that pairing has completed and the
SRL2 is ready to use. You will hear a voice prompt from the SRL2
saying “Your headset is paired”.
6. If you want to pair the Sena SR10, Bluetooth adapter, please refer
to the
section 4.5, “Pairing with the Sena SR10, Bluetooth Two-
way Radio Adapter”.
To Next Page
Loading...
Need help?
General
