Sena TUFFTALK M User Manual

Tufftalk M
18
2. When the headsets complete Mesh Grouping, users will hear a
voice prompt, “Group Mesh”.
Headsets automatically switch from Open Mesh to Group Mesh.
Note:
If the Mesh Grouping is not completed within 30 seconds, users will hear
a voice prompt, “Grouping failed”.
Joining an Existing Group Mesh
One of the members of the Existing Group Mesh can allow the new
members of an Open Mesh to join the Existing Group Mesh.
1. The current member and the new members put their headsets into
Mesh Grouping. Press and hold the Mesh Intercom Button for
5 seconds until the users hear a voice prompt, “Mesh Grouping”.
Headset A Headset B
Headset C in
Existing Group Mesh
[Current Member]
[New Members]
In Open Mesh
5” 5” 5”
Press Press Press
2. When the headsets complete Mesh Grouping, new members will
hear a voice prompt, “Group Mesh”.
The new members’ headsets automatically switch from Open
Mesh to Group Mesh.
Note:
If the Mesh Grouping is not completed within 30 seconds, current members
will hear a low tone double beep and a new member will hear a voice
prompt, “Grouping failed”.

Sena TUFFTALK M Specifications

General

Brand	Sena
Model	TUFFTALK M
Category	Conference System
Language	English