Sena TUFFTALK M User Manual

Tufftalk M
26
11.1.1 Phone Pairing
1. Execute Phone Pairing in the Conguration Menu.
2. Search for Bluetooth devices on your mobile phone. Select the
Sena Tufftalk M in the list of the devices detected on the mobile
phone.
3. If your mobile phone asks for a PIN, enter 0000.
11.2 Software Conguration Setting
You can change the settings of the headset through the Sena Device
Manager or the
Sena Utility App .
11.2.1 Speed Dial
Assign phone numbers for speed dialing to make a phone call quickly.
11.2.2 Channel Setting (Default: channel 1)
If the Open Mesh communication experiences interference because
other groups are also using the channel 1 (default), change the
channel. You can select one of 1 to 9 channels.
11.2.3 Audio Boost (Default: Disable)
Enabling Audio Boost increases the overall maximum volume.
Disabling Audio Boost reduces the overall maximum volume, but
delivers more balanced sound.
11.2.4 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice.
When you hear a ringtone for an incoming call, you can answer the
phone by saying a word such as “Hello” loudly or by blowing air into
the microphone. VOX phone is temporarily disabled if you are
connected to intercom. If this feature is disabled, you have to tap the
Center Button to answer an incoming call.

Sena TUFFTALK M Specifications

General

Brand	Sena
Model	TUFFTALK M
Category	Conference System
Language	English