2. FAMILIARISATION AND PREPARING FOR USE
2.1 VOLTAGE SELECTION
Unless otherwise instructed Sencon will ship 220-240V 50/60Hz models to all
European customers and 110-120V 50/60Hz models to all U.S.A. customers.
The operating voltage is
clearly indicated by a label on the bottom of the unit and the type of mains
lead (power cord) fitted, the 110V models having a moulded U.S.A. style
integrated mains lead and plug.
A switch is provided inside the instrument to change it between 110V and
220/240V operation, this can be identified by referring to Appendix 1.
Carefully read all instructions in Appendix 1 before changing this switch
position, and take note that the voltage label must be changed and the colour
code of the mains lead could potentially cause subsequent confusion with
resultant damage to the instrument.
220/240V models must be fitted with a mains plug appropriate for the country
of use in accordance with the following connection instruction;
BROWN WIRE - LIVE
BLUE WIRE - NEUTRAL
GREEN/YELLOW - EARTH
THIS UNIT MUST BE EARTHED
To Next Page
Loading...
Need help?
General
