Sencore ASM 988A - Snmp (Simple Network Management Protocol)

To Next Page

To Previous Page

ASM 988A – Manual

SNMP (SIMPLE NETWORK MANAGEMENT PROTOCOL)

Simple Network Management Protocol (SNMP) is a protocol layer which is used with

Ethernet to provide reliable system management from a remote location. On the ASM

988A, SNMP can be used to control and monitor the unit through both the Ethernet and

serial ports. This protocol allows a standard method to change or monitor settable

parameters and to generate a notice when an error condition occurs.

The SNMP Settings menu allow the user to change the SNMP Manager IP addresses.

To change any of SNMP settings, use the up/down arrow to select which setting to

change and press ENTER. There are 5 SNMP Manager IP addresses that can be set and

each address can be enabled or disable.

For more information and to get a copy of the MIB (Management Information Database),

please contact Sencore.